Welcome to Kamsons Chemicals Pvt. Ltd.

logo

Over Print Varnish Industry

ACRYLIC DISPERSIONS FOR PAPER & INKS

KAMICRYL-2090

STYRENE ACRYLIC COPOLYMER EMULSION FOR USE IN WATER BASED OVERPRINT VARNISHES AND INKS

Hard non-film forming properties. excellent optical clarity high gloss, good heat resistance fast drying.

Typical Properties
Appearance : Semi translucent emulsion
Non Volatiles : 44 + 1 %
Mol. Weight (wt.av.) : >200,000

Viscosity at 25ºC (Brookfield)

: 200- 400 mPa.s
pH : 8 + 0.5
Acid number (on solids) : 75
Density at 25ºC : 1.05 g/cm³
MFT : > 85ºC
Tg : 111ºC

APPLICATIONS

KAMICRYL-2090 is a non film forming emulsion developed for use in water based overprint varnishes and flexographic and gravure inks, providing high heat seal and film release properties. The heat resistant properties may be further enhanced by the addition of Zinc Ammonium Carbonate solution. In overprint varnishes KAMICRYL-2090 additionally provides gloss and optical clarity.

<< BACK

KAMICRYL-2089

STYRENE ACRYLIC COPOLYMER EMULSION FOR USE IN WATER BASED OVERPRINT VARNISHES AND AND INKS

Hard non-film forming styrene acrylic let down emulsion with good gloss & hold out in formulations for paper & paper board.

General Information

Typical Properties
Appearance : Semi translucent emulsion
Non Volatiles : 48 + 1 %
Mol. Weight (wt.av.) : >200,000

Viscosity at 25ºC (Brookfield)

: 400- 600 mPa.s
pH : 8 + 0.5
Acid number (on solids) : 50
Density at 25ºC : 1.05 g/cm³
MFT : > 88ºC
Tg : > 90ºC
<< BACK

KAMICRYL-2017

ACRYLIC EMULSION USED FOR OVER PRINT VARNISH


  • Good Gloss
  • Good film forming properties
  • Alcohol Compatibility, Adhesion
  • Good transparency
  • Economical & cost effective
  • Typical Properties
    Appearance : Translucent Emulsion
    pH : 8 + 0.5
    Non- Volatile % : 45.0 + 1
    Viscosity, cps
    (Brookfield LVF #2 spindle, 30 rpm, 25ºC)
    : 300-700
    Glass Transition Temperature, ºC(Tg) : 7
    Acid Number, (NV) : 63
    Molecular Weight, Mw : >200,000
    Minimum Film Forming Temp., ºC : <0
    Density, g/cc, (25ºC) : 1.05
    Flash Point : None

    KAMICRYL-2017 is a Rheology Controlled (RC) acrylic polymer emulsion that exhibits good gloss, transparency, and printability on many substrates common to the graphic arts.

    Additionally, KAMICRYL-2017 provides: film formation, good rubresistance, water resistance, low foaming, press transfer, high solids, and near Newtonian viscosity.

    << BACK

    KAMICRYL-2074

    ACRYLIC EMULSION USED FOR OVER PRINT VARNISH Film forming acrylic emulsion with good flexibility & adhesion to various substrates including plastics. It has excellent gloss & transparency and good water & grease resistance.

    Typical Properties
    Appearance : Translucent Emulsion
    pH : 8 + 0.5
    Non- Volatile % : 48.0 + 1
    Viscosity, cps
    (Brookfield LVF #2 spindle, 30 rpm, 25ºC)
    : 500-700
    Glass Transition Temperature, ºC(Tg) : - 9
    Acid Number, (NV) : 68
    Molecular Weight, Mw : >200,000
    Minimum Film Forming Temp., ºC : <0
    Density, g/cc, (25ºC) : 1.05
    Flash Point : None

    KAMICRYL-2074 is a Rheology Controlled (RC) acrylic polymer emulsion that exhibits good gloss, transparency, and printability on many substrates common to the graphic arts.

    Additionally, KAMICRYL-2074 provides: film formation, excellent grease & water resistance and good adhesion to certain plastic substrates & others.

    << BACK

    KAMICRYL-2077

    ACRYLIC EMULSION USED FOR OVER PRINT VARNISH

    Film forming acrylic emulsion with good block resistance, resolubility, printability, gloss & transparency.

    Typical Properties
    Appearance : Translucent Emulsion
    pH : 8 + 0.5
    Non- Volatile % : 48.0 + 1
    Viscosity, cps
    (Brookfield LVF #2 spindle, 30 rpm, 25ºC)
    : 500-700
    Glass Transition Temperature, ºC(Tg) : - 9
    Acid Number, (NV) : 68
    Molecular Weight, Mw : >200,000
    Minimum Film Forming Temp., ºC : <0
    Density, g/cc, (25ºC) : 1.05
    Flash Point : None

    KAMICRYL-2017 is an acrylic polymer emulsion that exhibits good gloss, transparency, and printability on many substrates common to the graphic arts.

    Additionally, KAMICRYL-2017 provides: good film formation, good rub resistance & good block resistance due to harder film forming properties.

    << BACK

    KAMICRYL 6550

    KAMICRYL 6550 is a water based acidic colloidal emulsion which can be easily solubilized with Alkali for use in ink for pre-print & post-print corrugated paper & board applications.

    Typical Properties
    Type : acrylic dispersion
    Appearance : Whitish , bluish
    Total solids (% w/w) : 42%± 1
    pH (25°C) : 2.0-3.0
    Acid value : 165
    Molecular weight : 55,000 to 60,000
    Viscosity, B4 cup : 14-16 seconds
    Density, g/cc, (25ºC) : 1.05
    Density of dipsersion (kg/l) : 1.065

    Properties:

  • Good Grinding medium
  • Good print & transfer properties
  • Good hot mar resistance
  • Good transfer properties

  • Recommendation for end-use:

  • For corrugated paper & boards
  • Good let dowm Vehicle
  • Good grinding properties
  • Economical cost

  • General Guidelines:

    Kamicryl 6550 is a high solid acidic dispersion and should be reduced to a lower solids with water to about 20-25 % and can easily be solubilized with ammonia or any alkali prior to use. The solubilization with alkali is complete at an approximate pH 7.5 to 7.7.

    At about pH 9.0-9.2 can be achieved a peak and stable viscosity by careful selection of final solid content and pH.

    Kamicryl 6550 may be solubilized and used as a grinding medium and letdown vehicle.