Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
 
 

Texture Coatings & Roof Pointing Emulsions

 

KAMICRYL 298 FCX

Styrene Acrylic fast cure emulsion

KAMICRYL 298 FCX is a flexible self-crosslinking fast cure styrene acrylic emulsion with wide array of performance property improvements
.
KAMICRYL 298 FCX is very well suited for texture & roof pointing coatings.
KAMICRYL 298 FCX has good adhesion to various substrates even at very low temperatures and high conditions of condensation.

KAMICRYL 298 FCX has good adhesion to various substrates.

KAMICRYL 298 FCX has excellent adhesion to masonry & metal substrates.

KAMICRYL 298 FCX may require coalescent for film formation especially at lower temperatures.
KAMICRYL 298 FCX is very suitable for various paints due to very good binding capacity properties with improved scrubs.

 
Typical Properties
 
Type : Anionic acrylic elastic emulsion
Appearance : Milky whitish yellowish

Non Volatiles

: 48%± 2
Glass Transition Temperature : 19°C
Elongation : > 200%
PH : 7.5 to 10.5
Viscosity : 100 to 650 cps
Density : 1.04 ± 2
 
Benefits:
 
• Fast cure for texture & roof pointing compounds
• Good binding capacity & high scrubs, high solids
• Direct adhesion to metals & use in metal primers
• Early hardness & early water wash out resistance
• Good adhesion to timber, concrete and masonry
• Multipurpose elastic coatings for decorative paints for interior
 
<< Back
 
KAMICRYL 18 FCX
Pure Acrylic fast cure emulsion
 

KAMICRYL 18 FCX is a self-crosslinking pure acrylic emulsion with wide array of performance property improvements.

KAMICRYL 18 FCX has good adhesion to various substrates.

KAMICRYL 18 FCX is very well suited for texture & roof pointing coatings.

KAMICRYL 18 FCX has excellent adhesion to masonry & metal substrates.

KAMICRYL 18 FCX may require coalescent for film formation especially at lower temperatures & has good UV resistance.

KAMICRYL 18 FCX is very suitable for various paints due to very good binding capacity properties with improved scrubs.

 
Typical Properties
Type : Anionic acrylic elastic emulsion
Appearance : Milky whitish yellowish

Non Volatiles

: 48.0%± 2
Glass Transition Temperature : 18°C
PH : 8.5 to 10.5
Viscosity : 100 to 650 cps
Density : 1.06 ± 2
 
Benefits:
Fast cure for texture & roof pointing compounds
Good binding capacity & high scrubs, high solids
Direct adhesion to metals & use in metal primers
Early hardness & early water wash out resistance
Good adhesion to timber, concrete and masonry
Multipurpose coatings for decorative paints for exterior
 
<< Back
 
   

Acrylic Polymers for Construction
Chemicals

Acrylic Emulsions for Paints
Acrylic Emulsions for waterbased inks
Water Based Polyurethane Dispersions (PUD's)
Nano-Acrylics for Paints, Coatings on Metal, Wood
Hygiene Coatings for Cleanrooms
Waterproofing Construction Chemicals
Self Priming Direct to Concrete Emulsions
Advanced Specialty Architectural Emulsions (DTM)
Self Crosslinking Emulsions
Timber Emulsions
Over Print Varnish Industry
Texture Coatings & Roof Pointing Emulsions
Elastomeric & Waterproofing Emulsions
Wood Paints
 
 
Home - About Us - Products - Clientele - Enquiry - Contact Us Designed & Hosted by : MID   Promoted by : GID