KAMICRYL-FLEXKOTE
GENERAL PURPOSE LATEX MODIFIED WATERPROOF COATING

Water Proof Coating

 FLEXKOTE is a thixotropic, cold applied high build bitumen based coating. The dry film of FLEXKOTE provides a watertight barrier, which is highly resistant to chlorides and sulphates present in the soil. FLEXKOTE is ideal for the DIY market due to its ease of application.
Uses
Waterproofing/damp proofing of most porous substrates, Protection of foundations, Waterproofing of basements, kitchens, bathrooms, balconies and building facade. Vapor barrier, Damp proof membrane in sandwich panel construction. Repair and restoration of leaking roofs etc.
Features
o Single component-ready to use.
o Cold applied.
o Easy to apply even on vertical surfaces.
o Resistant to creep up to 100 0 C
o Can be applied immediately to green concrete after initial set/removal of shutter
o Non-flammable
o Environment friendly
 o Economical.
Typical product characteristics
Appearance :

Thixotropic black emulsion dries to a black  Flexible protective membrane.
pH : 6.0 – 9.0
Sp. Gr. : 1.03 +/- 0.01
Viscosity (Brookfield) 30 0 C : 1500-2500 cps
Cure time                            : 24 to 48 hours depending upon temp. & Humidity.
Heat test (100 0 C)  [ASTM D 36-84] : No sag, flow or blistering.
Elongation  [ASTM D 412] : 200% (approx.)
The drying time depends on the type of substrate, temperature, humidity and
thickness of layer, etc.
Surface Preparation :
Surface should be sound, clean and free of dust, oil or grease and curing compound. Loosely adhering particles such as rust scale, cement particles etc should be removed with wire brush or other suitable means. 
Application :
FLEXKOTE can be applied by brush, squeegee or roller. Hot, dry or highly porous surfaces should be dampened with clean water prior to application of FLEXKOTE. For proper protection usually two coats are recommended. Apply second coat at right angle to the first one, when the first coat is completely dry. When screed or render is to be applied onto the coating the final coat should be sprayed with sharp clean sand and allowed to dry. Brush off excessive sand before application of screed or render. FLEXKOTE also acts as a non-degradable curing membrane; hence it can be applied immediately after the removal of mould, to the concrete structures, which has no aesthetic value such as the sub-structure of the building.
Coverage :
* Damp proofing/ vapor barrier 0.4 kg/m2/coat- 2 coats recommended 
* Waterproofing membrane 1.0 kg/m2/coat- 2 coats recommended

Packing
200 kg drum, 14 Kgs Pail
Storage/Shelf life
Keep away from direct sunlight and store under normal warehouse conditions. The shelf life of this product is 12 months from the date of manufacturing provided the materials is stored in unopened factory packed drums.
Cleaning
Tools may be cleaned with water as long as the product is wet.  Once dry, by mechanical means only.
Health and Safety
 Use normal safety precautions. Wear rubber hand gloves, safety shoes and safety goggles while using and handling the product. Avoid contact with skin and eyes. In case of accidental contact with eyes, wash with plenty of water and seek medical treatment immediately. As with all chemical products, caution should always be exercised. 
General Note
This leaflet is a guide for the use of the product concerned. The information given is in accordance with latest technical developments. However, we do not accept liability/ responsibility for any work carried out with our materials as we have no control over the method of application used or the condition of site involved.

MATERIAL SAFETY DATA SHEET FLEXKOTE

Important: Read this MSDS before handling and disposing of this product and pass this information on to employees, customers, and users of this product.

1. Generic / Trade Name

FLEXKOTE

2. Chemical Name

Latex Modified Bituminous paste membrane

3. Supplier

KAMSONS  CHEMICALS  PVT.  LTD. 
Plot No. A-726, T.T.C., MIDC, Mahape,  Navi Mumbai.     Ph : 022-27780767, 022-27780768.  Fax : 022-26854438

4. Composition

Paste based latex modified bitumen emulsion

5. Hazardous Ingredients

Nil

6. Appearance and Colour

Black thixotropic emulsion

7. Usage

Waterproofing paste membrane

8. Physical Properties

Density Kg/M'

Boiling Point (°C)

Viscosity at 20°C

Flash Point   (°C)

Auto ignition temp

Flammability Limits

Other

    Solubility in Water (Kg/CuM)

    pH

    Particle size (Micron)

 

 

1.04+/-0.01

> 100

2500cps

NA

NA

NA

-

Miscible

>8

4.0 - 5.0

 

9. Important Characteristics

None

10. Safety Hazards

None

11. Precautions

None

12. Fire Extinguishing agents     

Foam / COz extinguishers

13. Fire fighting precautions

-

14. Health Hazards
      Inhalation
      Skin
      Eyes
      Ingestion                     

 
May cause dizziness on prolonged inhalation.
On prolonged contact cause irritation.
Cause irritation
Seek immediate medical attention

15. First Aid                         

 

In case of skin contact, flush with plenty of water. In case of eye contact, or accidental swallowing, flush with plenty of water and seek medical advice immediately.

16. Personal protection

Normal Usage.
Spill Control/clean up.

Besides using apron and Safety shoes always use safety goggles and rubber gloves while handling the product
 
Spill clean up by washing with water.

17. Environmental Hazards       

 

None

18. Precautions                      

 

As above keep away from children.

19.Spillage Mitigation             

  (see also 15)                       

Spillage can be collected in a container and wash surface with soap and water.

20. Disposal options              

 

Collect all spillage in a container and wash surface with water.

21. Storage/Shelf life/Date of      

   Manufacturing/batch No:   

   Printed on the drum

 

Store in cool dry place, protected against heat / sun. The shelf life of this product is one year from the date of manufacturing

provided  the  material  is  stored  in unopened  factory  packing.

 

22. Packaging & Labelling       

 

200 Kg Drum & 14 kg Pail

1 23. Supplementary Info.

CAS NO: 8052-42-4 FOR ASPHALT BITUMEN

Disclaimer of Liability
1. This MSDS was prepared and is to be used only for this product. If the product is used as a component
     in another product, this MSDS information will not be applicable, & company will not be responsible in
     any manner for the damages, if occurred, due to other external factors.
2. The information in this MSDS was obtained from sources, which we believe are reliable. However, the
    information is provided without any warranty, express or implied, regarding its correctness.
3. The conditions or methods of handling, storage, use and disposal of the product are beyond our control
    and may be beyond our knowledge, for this and other reasons, we do no assume responsibility and
    expressly disclaim liability for loss, damage or expense rising out of or in any way connected with the
    handling, storage, use of disposal of the product.

      
 
FLEXKOTE emulsion protects
foundations against infiltrating moisture
and ground water.

 

FLEXKOTE is a special bitumen emulsion. based on high
quality bitumen and fillers.
FLEXKOTE provides a good protective membrane or a flexible
binder if used in cement mortar.
FLEXKOTE is a waterbased thixotropic binder, therefore it can be directly applied from the cotainer and contains no flammable
or noxious solvents.
FLEXKOTE adheres very well to most clean building materials
and withstands all climatic conditions.
FLEXKOTE can be used on most roof
constructions and diferent subbase materials : e.g. roofing-felt, concrete,
asphalt, asbestos, cement etc.
Apply more layers to achieve the desired thickness.



FLEXKOTE protects concrete and
steel constructions against moisture
and atmospheric pollution.
FLEXKOTE emulsion can be mixed in a
special cement. aggregate mortar to
obtain a dustfree anti skid flooring with permanent plasticity. These floorings can be laid on an old or new substrate
and can be used for warehouses with
forklift trucking.

 
FLEXKOTE emulsion provide after drying a
weather-proof finish and prevents the infiltration
of water and moisture in the insulation.
FLEXKOTE creates a vapour proof layer
in cold insulations


FLEXKOTE emulsion can also be used
as bonding agent for wood block floorings,
titles stones and insulation to brickwork,
concrete etc.


 

   Designed & Hosted by : MID   Promoted by : GID