KAMTHANE K-1470
KAMTHANE K- 1470 is a hard polyurethane dispersion with good abrasion and chip resistance.
Typical properties
| Type | anionic, dispersion |
| Appearance | bluish white, translucent. |
| Total solids (% w/w) | 34%± 1 |
| pH (25°C) | 7 to 9 |
| Viscosity | 75-250 cps |
| NMP | 5.0 % |
| Elongation at break | 300 % |
| Konig hardness | 140 |
| Freeze/thaw stability | stable |
Film properties
Hard
and flexible.
Good water resistance.
Low level of thermoplasticity.
Excellent chip / abrasion resistant.
Recommendation for end-use
Floor and wall coatings.
Joinery Paints.
Hygiene coatings.
Concrete coatings
Multi-surface paints
Plastic coatings.
General guidelines
The addition of wetting and/ or levelling agents and defoamers is required.
Kamthane K-1470 should be formulated with suitable coalescents, thickeners and matting agents.
Kamthane K-1470 can be combined with limited amounts of acrylics
THESE SUGGESTIONS & DATA ARE BASED ON INFORMATION WE BELIEVE TO BE RELIABLE. THEY ARE OFFERED IN GOOD FAITH, BUT WITHOUT GUARANTEE, AS CONDITIONS AND METHODS OF USE OF OUR PRODUCTS ARE BEYOND OUR CONTROL.
 |
-----------------------------------------------------------------------------------------------------------------------------------
