AQUABOND-360
It is a common problem to have leakage of the terrace. This leakage is less in a terrace with porcelain chips glazed tiles. In case of leakage of this, normally the entire waterproofing material like brickbat coba, PCC, Chips are removed by chipping the surface. The slab is cleaned and waterproofing compound is applied. Waterproofing is again done by brickbat coba, PCC, Chips. This is not only time consuming but highly expensive also and it doesn’t guarantee the waterproofing of the terrace. Aquabond-360 has been introduced as an ideal solution for such critical problems. It is having following applications:
 
·  Complete waterproofing of terrace fitted with chips/glazed tiles
·  Waterproofing of the terrace having PCC.
·  Walls having heavy leakage’s etc.
 
Aquabond-360 is specially recommended in case of leaky terraces having chips/ tiles where other waterproofing compound fails as they do not have adhesion to chips/tiles.
 
Method of usage:
 * Clean the surface thoroughly if there is are major cracks fill it with crackfilling compound of SEALTITE,
    cement & sand (in proportion of 2:5:15 with adequate curing. Ensure the surface to be clean, free of
    dust, oily, greasy material.
 *  Apply Primer Aquabond-360 to the surface this coat will block microcapillaries, which are normally
    generated in the surface & also improve the adhesion of coat of Aquabond-360. Wait for minimum 4
    hours .The coated area should include the terrace and at least 6 inches above the bottom portion of the
    side walls.
 *  Apply the first coat of Aquabond-360 on the surface, application should be in one direction.
 *  Don’t walk on the surface or scratch the surface by any object as the film is not totally cured although
     it is dry.
 *  Make sure that surface is dust free, apply second coat after 3 days the direction of this application of
    this should be in the direction perpendicular to that of first coat.
*   Ensure that the surface is coated uniformly, care should be taken to coat joints of outlet pipes of the
    terrace properly.
*   Allow this surface to cure for 10 days.
 
 
Key features of Aquabond-360:
*  Aquabond-360 has excellent adhesion to surfaces like glazed tiles, concrete, metal,
   glass etc where conventional waterproof coatings do not have any adhesion.
*  It has excellent abrasion resistance properties and an absolute water repellency.
*  It has excellent film properties.
*  It does not have surface exhudation of naked film even after being immersed continuously in water.
*  Outstanding wet adhesion properties.
*  Superior water scrub resistance
*  Excellent resistance for dirt pickup.
*  Excellent water repellent.
*  Excellent UV resistance.
*  Can withstand hostile conditions like high temperature ( 2000C) and Heavy water flow
*  Excellent abrasion properties.
*  Excellent flexibility,therefore it can withstand contraction and expansion of concrete.
*  It is not silicone based & has excellent recoatability
*  Excellent exterior durability
*  It is water-based & Eco friendly
 
Product specification:
*     Appearance   -  Translucent to opaque
*      Ionic charge   -  Anionic
*      pH                  -  7 to 9
*      Viscosity        -  0.5 to 2.5 poise
 
Usage:
 
*  For waterproofing of terraces, chajjas, water tanks, toilets, bathrooms, walls
 
Coverage:
· Primer Aquabond-360           -   200 sq ft. per kg
· First coat of Aquabond-360   -   40 sq. ft. per kg
· Second coat                        -   40 sq. ft per kg.
 
Available in 20kg, 50kg, 100kg, 200 kg. Plastic containers
 
Storage: 
*  Store in cool dry place, close the lid tightly after use.

Aquabond-360 is a self-crosslinking hybrid Polyurethane dispersion with excellent abrasion, U.V. resistance, durability, and absolute water resistance.


Product specifications
 Colour & Appearance          Translucent to opaque
Ionic  charge                      Anionic charge
pH                                    7.0 to 9.0
Viscosity                           0.5 to 2.5 poise
  

Key features
 Aquabond-360 is a water based hybrid and ecofriendly.
Aquabond-360 is a tough hard polymer with excellent water and alcohol resistance.
Aquabond-360 has a very low Tg and MFFT is below freezing point.
Aquabond-360 is flexible ( 200% Elongation) inspite of being very hard, unlike conventional acrylics.
Aquabond-360 can be applied to moist surfaces as it is waterbased.
Aquabond-360 is self-cross linking hybrid, which reacts with sunlight and moisture upon drying.
Aquabond-360 is recommended especially for exterior coatings due to it’s superior durability.
Aquabond-360 has excellent abrasion properties.
Aquabond-360 has outstanding adhesion to surfaces like Glass, Glaze tiles, Metal, Concrete etc.
Aquabond-360 can withstand temperatures upto 200 º C. The film is non- tacky even at high temperatures.

Aquabond-360 can be used in Construction chemical industry as a clear membrane coatings over surfaces like glaze tiles, china mosaic, concrete, glass etc. as a waterproofing coating to prevent leakages. Inspite of being a tough hard coating it also imparts a great degree of flexibility, which is necessary as there is a lot of contraction and expansion of concrete. It can also be applied over hairline cracks as a waterproof coating to prevent leakages.

Aquabond-360 can be used as hygiene coatings, as it replaces solvent systems.

Aquabond-360 is suitable as a concrete floor coating or decorative finish where chemical and abrasion resistance are particularly important.

 Aquabond-360 can be used as a tough flexible lacquer with good gloss for anti-graffiti coatings.

 Aquabond-360 is suitable for use as wood coating, parquet floor lacquer, concrete floor sealer and decorative finish.

Packing: Aquabond-360 is available in 20 Kgs, 50 Kgs, 100 Kgs and 200      Kgs plastic containers/drums

Storage: Store in a cool dry place. Close the lid tightly after use.
 

AQUABOND-360  | KAMTHANE AQUA COLOUR TOP | SEALTITE | Sealcoat | SILICOAT - WR | Aquabond-360 |
 PU WALLGAURD | Kamicryl - ELASTOFALT |  KAMROOF-GFM

Designed & Hosted by : MID   Promoted by : GID